The Ekinex FF series consists of a plastic, metal or Fenix NTM push-buttons, thermostats, displays, sockets and more. All products are available in the FORM, FLANK, ‘NF, DEEP and SURFACE design whereas the different finishes can also be combined.

EKINEX WALL-MOUNT DEVICES

The FF Series 4-fold basic push-button, push-button with thermostat and 6-fold push-button can control lighting and motorized shutters or perform any other programmable command. Thanks to the integrated temperature sensor, these pushbuttons can work as a room or zone thermostat. Except for the basic push-button, these devices contain LEDs in blue/green or white/red color combination. Moreover, push-buttons integrate a KNX bus communication module and are supplied with SELV voltage directly from the KNX bus therefore don’t require any auxiliary power supply.

EKINEX ROOM TEMPERATURE CONTROLLERS

The Easy room temperature controller is a digital thermostat with a user-friendly interface. While using a single differentiated set point for heating and cooling with single on/off operating mode, this device can control terminals with one or two stages and fan-coil units with 2 or 4 pipe hydraulic supply. For more units, there is a Room temperature controller which independently regulates the temperature of a room or a zone. In combination with one or more KNX actuators, this room controller is able to control a series of terminal units. Finally, there is even room controller with a relative humidity sensor available.
The room temperature controllers are equipped with an LCD display with adjustable backlight, temperature and brightness sensors, and two freely configurable inputs. These devices also integrate the KNX bus communication module while being supplied with SELV voltage directly from the KNX bus.

TOUCH & SEE DISPLAYS

Ekinex Touch & See displays are a KNX devices for the switching, control and display of bus functions. With an integrated KNX bus communication module, they provide easy and intuitive control but also display the information from the actuators and sensors. Moreover, they can perform as a room thermostat for up to 8 independent zones, receiving the measured values from the bus. The devices are powered by a SELV voltage directly from the KNX bus too, but requires an auxiliary 30 Vdc power supply, and also integrate a KNX bus communication module.

PRESENCE & MOVEMENT SENSORS

The movement sensor is used to detect the movement and presence in a semicircular detection area. It is a perfect solution for environments with occasional occupancy such as hallways, toilets, stairwells, etc. The device also has dedicated channels for lighting, HVAC and alarms control. Movement and presence detection is carried out by PIR (passive infrared) sensors which also allows the measurement of ambient brightness. The operating mode is semi-automatic or fully automatic.
There is also a KNX motion sensor for ceiling mounting with 2 lighting channels (with constant brightness control), 2 HVAC channels and 1 alarm channel. It kas detection range of 3, 6 or 12 meters while control parameters can be set via ETS or IR remote control. Explore more FF serie sensors here.

POWER SOCKETS

A wide range of power sockets are available for the integration of network, multimedia and antenna systems. Standard dimensions allow easy assembly. They are completed with a square, double or triple panel with a 55 x 55 mm window, in which one or more modules can be placed. The FF series has a range of sockets with one or two cover plates that can be combined with the same finishes and colors of push-buttons and thermostats.

VOICE ASSISTANTS – COMING SOON

The Eséguo voice assistant is based on the Amazon Alexa platform and has built-in certified Alexa and will offer the possibility of numerous adjustments for the most diverse needs.